Diet Stars Pret, Pareri, unde sa Сumparati in România

Eco slim uporaba

  • Samsung MC28MCS User Manual download pdf (Page )
  • Front bike light Specialized Stix Switch Head/Tail | Magazin Extreme Vital
  • Installation Manual TRXXL Ru SL Hu PL
  • Задумчиво произнес Ричард.

Before you install the washing machine, select a location with the following characteristics: A hard, level surface if the surface is uneven, see "Adjusting the leveling feet," below Away from direct sunlight.

Room temperature that will not fall below 0 C Away from sources of heat such as coal or gas Make sure that the washing machine does not stand on its power cord. Ventilation openings must not be obstructed by carpeting when the washing machine is installed on a carpeted floor.

susu l bărbați își pierd greutatea

Adjusting the leveling feet If the floor is uneven, adjust the feet do not insert pieces of wood or any other objects under the feet : 1. Loosen the leg bolt by turning it with your hand until it is at the desired height. Tighten the locking nut by turning it with the supplied wrench.

98 kg pierde in greutate

Place the washer on a sturdy, flat surface. If the washer is placed on an uneven or weak surface, noise or vibration occurs.

vă recomandăm și:

Only a l degrees angle is allowed. Removing the shipping bolts Before using the washing machine, you must remove the five shipping bolts from the back of the unit. To remove the bolts: 2 1. Loosen all bolts with the supplied wrench before removing them.

Take each bolt head and pull it through the wide part of the hole. Repeat for each bolt.

Gsr 14,4 v-ec

Fill the holes with the supplied plastic covers. Keep the shipping bolts for future use. Connecting the water supply hose Option 1. Remove the adaptor from the water supply hose.

ajutor natural pentru pierderea în greutate

Next, take the adaptor and turn part b following the arrow until there is a 5mm gap. Connect adaptor to the water tap by tightening the screws firmly.

Installation Manual TRXXL Ru SL Hu PL

Then, turn part b following the arrow and put a and b together. Connect the water supply hose to the adaptor.

Sper sa fie bun si sa nu-mi creeze probleme. Data fiind natura jobului meu, nu-mi pot permite sa folosesc suplimente care au efecte diuretice. Revin cu pareri despre.

Pull down part c of the water supply hose. When you release part c the hose automatically eco slim uporaba to the adaptor making a click sound.

cum să mi pierzi jumătate din greutatea mea

Connect the other end of the water supply hose to the inlet water valve at the top of the washer. Screw the hose clockwise all the way in. If the water tap has a screw type faucet, eco slim uporaba a the water supply hose to the tap as shown.

pierderea în greutate rutland vt

Use the most conventional type of faucet for water supply. In case the faucet is square or too big, remove the spacing ring before inserting the faucet into the adaptor.

Bine ați venit la Scribd!

Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high pressure hose.

andarine pentru pierderea în greutate

To connect the water supply hose: 1. Take the L-shaped arm fitting for the cold water supply hose and connect to the cold water supply intake on the back of the machine.

  • Pastile eco-supresive
  • Compoziția Diet Stars
  • Masina Spalat FA | Washing Machine | Ac Power Plugs And Sockets
  • Мышцы ее пробыли в бездействии слишком долго.

Eco slim uporaba by hand. Connect the other end of the cold water supply hose to your sink's cold water faucet and tighten it by hand.

Masina Spalat F1045A

If necessary, you can reposition the water supply hose at the washing machine end by loosening the fitting, rotating the hose, and retightening the fitting. Option: 1. Take the red L-shaped arm fitting for the hot water supply hose and connect to the red hot water supply intake on the back of the machine. Connect the other end of the hot water supply hose to your sink's hot water faucet and tighten it by hand. Use a Y-piece if you only want to use cold water.

Note: The appliance is to be connected to the water mains using new hose-sets and that old hose-sets should not be used. Positioning the drain hose The end of the drain hose may be positioned in three ways: Over the edge of a sink The drain hose must be placed at a height of between 60 and 90 cm.

michael kors tasche weiß

To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the faucet with a piece of string to prevent the drain hose from moving. You will NOT need to ground the plug of the washing machine. For U. You MUST ground the plug of the washing machine. Check with a licensed electrician before using the machine to make sure it is properly grounded.